So to understand the difference between the cables here are some facts about them. Here are some basic differences between the patch and the crossover cables. The difference between the patch cables and the crossover cables is that the cables are made by different procedures.
The patch cables are a straight cable between the ends, but the crossover cables have many swaps between the two ends. So during the connection of these cables with connectors, it makes differences in the pins of the connectors. Patch cables are straight cables that have the same numbering of wires from one end to the other.
It is mainly used to connect different devices. It is mainly used for internet connections domestically. This wire is first connected to the connectors and then connected with computers and routers to provide an internet connection domestically. Crossover cables are the cables whose sequences are not the same throughout the cable.
In this, the wires within the cables are swapped r crossover inside the skin. So they have different output number pins as of the input. Reminder: RJ connections are numbered with the RJ45 connector clip on the bottom and with the cable opening facing you. Free technical support is available for your desktops, laptops, printers, software usage and more, via our new community forum, where our tech support staff, or the Micro Center Community will be happy to answer your questions online.
Ask questions and get answers from our technical support team or our community. Helpful articles written by Micro Center Experts. ESET Windows. Both ends use the same wiring standard: TA or TB. So both side connector A and connector B of patch cable have wire arrangement with same patch cable colors as shown in the following picture. These patch cables are widely used for connecting the computer to the switches, hubs, or routers.
Crossover cable, as the name suggests, cross over or swap on its way when coming from one end to the other. Unlike patch cable, crossover cable uses two different wiring standards on both end: one end uses the TA wiring standard, and the other end uses the TB wiring standard.
Both side connector A and connector B of crossover cable have wire arrangement with different color, and the wires that come out of the connector A should match the correct pin at the connector B. As shown in the following wiring scheme, you can see that Pin 1 on connector A goes to Pin 3 on connector B, pin 2 to pin 6, pin 3 to pin 1 and pin 6 to pin 2, etc.
The crossover cables are mainly used for connecting two routers, computers, or hubs. In brief, a crossover cable connects two devices of the same type to communicate together, like a PC to a PC, or a switch to a switch. The patch cable connects two different devices to each other, like a PC and a switch. The following scenarios will explain the different applications.
If we have two computers connected directly to each other. And both PCs try to transmit on TX wire, their signals will collide. Moreover, nothing will be sent on RX wire. Therefore, neither computer will be able to receive anything.
0コメント